How To Backwash A Pool Pump

How To Backwash A Pool Pump. Turn on the pool pump. Turn the pool filter system off.

How To Backwash a Hayward DE Filter
How To Backwash a Hayward DE Filter from www.inyopools.com

You can’t backwash a pool filter without turning on the pump. Backwashing is a process you can easily do yourself or engage the services of a pool maintenance team. Moreover, if you forget this, you will cause damage to the system and potentially destroy it.

Position The Valve To The Backwash Mode.

If you’re wanting to backwash a sand filter yourself, here are the steps you should follow: Attach your pool hose to the backwash port on your sand filter. First, turn off the filter system.

Once The Pool's Valves Are In The Proper Backflush Positions, You Need To Turn The Pool Pump Back On, Causing Water To Flow In Reverse Through The Filtration System And Thus Washing The Dirt And Debris From The Filter.

Turn the pump on and backwash for 2 minutes or until the water in the sight glass (located on the filter) is running clear. This will be the hub of where the backwash really happens. Turn off your pool pump.

Let The Water Get Backwashed For Some Minutes.

If your filter is normally operating at 15 psi but suddenly rises to 25 psi, you should backwash it. Turn off the water heater before you start backwashing. Turn off the pump when the water is cold.

The Water Goes In Whichever Direction The Valve Points.

Turn your pump back off. You can’t backwash a pool filter without turning on the pump. Turn the pool filter system off.

Turn The Filter’s On/Off Switch To The Off Position.

That said, many pool owners backwash weekly as part of their summer maintenance routine, often after they vacuum to collect the remaining particles that are often stirred up. If it’s set to the backwash direction, the water will flow through the backwash hose. Ideally during the regular swimming pool service, after the pool has been vacuumed and cleaned.

Leave a Reply

Your email address will not be published.