How To Measure Kitchen Sink Strainer. Most kitchen drains measure about 3½ inches in diameter. Now you need to measure the depth of your drain so push the.
Choose a strainer suited to the thickness of the sink. Sink strainers with chic design : The standard kitchen sink drain hole opening is 3.5 inches, but some are as large as 4 inches.
Table of Contents
The Kitchen Sink Provides An Option To Add A Water Trap And A Strainer Connection For A Washing Machine Or Dishwasher.
Measurement to use is the inside of the widest part of drain. Most kitchen drains measure about 3½ inches in diameter. Some bathroom sinks have a slightly narrower opening at 1 1/4 inches, while others are a bit wider at 1 5/8 inches.
Wrap A String Around The Pipe.
Mark the point where the string touches together. « all kitchen sink basket strainers are the same size, 3 1/4 in diameter » therefore, the 3 1/4 basket assembly will fit the 3 1/2 sink drain opening every time. Insert the end of the measuring tape into the drain, beside the edge.
Check The Strainer Product Specifications And Select A Strainer Sized To Fit Your Opening.
It is the same size as a typical standard. All kitchen sinks today have the same diameter drain, which is 3 1/2 inches and is larger than a bathroom drain which measures in at 1 1/4 inches. Standard strainer assemblies designed for stainless steel sinks may not fit an enameled.
Inspired By A Modern Style, The Large Foam Soap Dispenser, And Sponge Holder Is A Functional And Decorative Accessory With A Simple Yet Elegant Design That Makes A Gorgeous Accent That Will Enhance The Look Of Your Home Decor.
My inside measurement is 3 1/4, my strainer is 3 1/8 and fits loosely until pushed all the way. If your sink is a little deeper than that, you can pick up a larger one from the local hardware store. You don't have to measure it, you don't have to measure the size of your sink drain hole, this is the standard in the industry.
Add A Stylish Flair To Your Kitchen Sink Or Bathroom Counter With Our Ceramic Soap Dispenser With A Sponge Holder.
Back nut strainers get their name from the back nut that holds all the components in place. Most sinks do not have a flat bottom to allow for better drainage, which is why it is important to note the deepest part of your sink. This kind of strainer is fit in a way that it is connected to the plumbing system.